ESB303.LED.200/400Vac

  • Inrush Current Limiter (ESB) for DIN-Rail TS35mm
  • Use as a 1-3-channel 1Ph 200...240Vac+N or in 2-3Ph 400Vac+N networks

Product Information (PDF)

Data Sheet ESB303 EN61010 EN62368 (PDF)

 

 
 

ESB303.LED.200/400 (3x1Ph 200-240Vac+N / 1-2Ph 400Vac+N)

Model ESB303.LED200/400(R2)
Limiting Peak current 48A for Ton=350ms
Limiting RMS-value 33,9A for Ton=350ms
Limiting Cycle Interval 1200ms (3x/minute)
Low Voltage Detection Toff=800ms
Frenquency  16 1/3 -  440Hz
Nominal voltage 1-3Ph 200 - 240Vac+N / 2-3Ph 400Vac+N
AC Continuous Current 3x 16A input/output
Power Consumption 3,3W (1,1W per phase)
Load capacity 3x 6000uF
Connectors Spring-type-terminal 0,5 - 6mm²
Ambient Opearting Temperature -40°C - +60°C no derating
Cooling Natural convection
Dimensions (WxHxD) 97.8 x 110 x 62mm (5TE)
Safety Norms EN61010-1, EN61010-2-201, EN62368-1, EN60204-1, EN60950-1
Special Features Temperature protected (fuse)
  Fire protected
  Accuracy ±5%, independent from ambient temperature
  Capacitive loads
  Bypass circuit
  4000m / 13123 ft. above sea level