DE 
UK 
Specifications
- Inrush Current Limiter (ESB) DIN-Rail TS35mm
- Designed for rough industrial environment
- Built-in switch mode power supply
- Phase Monitor (under voltage / loss / asymmetry)
- Ton limiting time & Toff low voltage delay time adjustable
- Advanced passive cooling with over dimensioned limiting resistors
- Limiting of each phase completely independent
STEP Datei (STP)ESB00163A 3PH
| Model | ESB00163A(R2) |
| Art.No. | 3041099011CA |
| GTIN / EAN | 4262552170822 |
| Limiting Peak current | 22,6A Ton adjustable 70 to 240ms |
| Limiting RMS-value | 16A Ton adjustable 70 to 240ms |
| Limiting Cycle Interval | 60s |
| Low Voltage Detection | Toff adjustable 60 to 170ms |
| Input Voltage | 3x 170 - 575Vac or 2x 170 - 575Vac, 47 - 63Hz |
| Nominal voltage | 3x 200/400/500Vac selectable |
| AC Continuous Current | 3x 16A |
| Load capacity | 3x 1500uF |
| Connectors | Spring-type-terminal 0,5 - 16mm², 22 - 8AWG |
| Ambient Opearting Temperature | -20°C - +45°C no derating |
| Cooling | Natural convection |
| Dimensions (WxHxD) | 95 x 155 x 122mm |
| Safety Standards | EN61010-1, EN61010-2-201, EN62368-1, EN60204-1, EN60950-1 |
| Special Features | Integrated & complete phase monitor |
| Asymmetry, phase lost, phase sequence | |
| Accuracy ±6%, independent from ambient temperature | |
| Extending monitoring | |
| Each phase limited independently | |
| Capacitive loads | |
| Active & precise measuring circuit | |
| Bypass circuit each phase | |
| Built in switch mode power supply | |
| Temperature protected | |
| Fire protected |
ESB00163B 3PH
| Model | ESB00163B(R2) |
| Art.No. | 3041099001CA |
| GTIN / EAN | 4262552170839 |
| Limiting Peak current | 22,6A Ton adjustable 70 to 240ms |
| Limiting RMS-value | 16A Ton adjustable 70 to 240ms |
| Limiting Cycle Interval | 60s |
| Low Voltage Detection | Toff adjustable 60 to 170ms |
| Input Voltage | 3x 170 - 460Vac or 2x 170 - 460Vac, 47 - 63Hz |
| Nominal voltage | 3x 200/400Vac selectable |
| AC Continuous Current | 3x 16A |
| Load capacity | 3x 1500uF |
| Connectors | Spring-type-terminal 0,5 - 16mm², 22 - 8AWG |
| Ambient Opearting Temperature | -20°C - +60°C no derating |
| Cooling | Natural convection |
| Dimensions (WxHxD) | 95 x 155 x 122mm |
| Safety Standards | EN61010-1, EN61010-2-201, EN62368-1, EN60204-1, EN60950-1 |
| Special Features | Integrated & complete phase monitor |
| Asymmetry, phase lost, phase sequence | |
| Accuracy ±6%, independent from ambient temperature | |
| Extending monitoring | |
| Each phase limited independently | |
| Capacitive loads | |
| Active & precise measuring circuit | |
| Bypass circuit each phase | |
| Built in switch mode power supply | |
| Temperature protected | |
| Fire protected |