CPS-i3000 3000W Laboratory Power Supply 19-Inch & Wall-Mount

    • 3D-HD (3D Heat Dissipation) performs 360° mount in a 3-dimensional room
    • 0-max. durrent & voltage programmable
    • Current & Voltage Monitoring
    • N+1 Parallel Operation
    • Maste Slave Operation for synchronus programming
    • Current Share Bus for equal power distribution
    • Constant Current Mode & Constant Voltage mode
    • Fuse Mode & Continuous Mode
    • Sense Compensation
    • Remote Shutdown
    • Inhibit (Interlock)
    • Temperature Monitoring & Fan Fail Monitoring
    • Aux +12V 500mA
    • Optional Powersink for quick down programming
    • 9KW in a 2U sub rack
    • 15KW in a 3U sub rack

Product Information (PDF)

Datenblatt CPS-i3000 EN61010 EN62368 (PDF)

 

 
 

CPS-i3000

Model CPS-i3000(R2)
Continuous Power 3000W
Nominal Input Voltage 230Vac
Input Voltage Range AC 184-264Vac
Input Voltage Range DC 250-375Vdc
Hold-up Time 20ms
Inrush Current AC Electronic Inrush Limiter 14,Arms
Autostart Soft start
Programmable Output Voltage 0-18V 0-30V 0-60V 0-90V 0-150V 0-300V
Programmable Output Current 0-185,0A 0-125,0A 0-62,5A 0-41,5A 0-25,0A 0-12,5A
Ripply & Boise mVpp 35mV 35mV 75mV 100mV 200mV 400mV
Effeciency 94%
Basic Load Idling-proof
Short Cicuit Protection Continuous
Cooling Stepless controlled fans from EBM-Papst (Germany) flow front-to-rear
Dimensions (WxHxD) 126,4x84x444mm, 2U or 3U 19-Inch sub-rack or wallmount in 90° steps
Safety Standards EN61010-1, EN61010-2-201, EN62368-1, EN60204-1, EN60950-1
Input- /Output Isolation 3000Vac
EMI EN55032 class B and class A depending on models
EMS EN61000-6-2,3,4
MTBF 419.000h
Interface Voltage Programming 0-5Vdc, 0-10Vdc, 0-20mA, 4-20mA
Interface Current Programming 0-5Vdc, 0-10Vdc, 0-20mA, 4-20mA
Interface Voltage Monitoring 0-5Vdc, 0-10Vdc
Interface Current Monitoring 0-5Vdc, 0-10Vdc
Inhibit (Interlock) Yes
DC Power Good Relay Yes
AC Power Good Relay Yes
Sense Compensation Yes
Remote Shutdown Yes
Reference Voltage Yes
Fuse Mode Yes
Continuous Mode Yes
Master Slave Mode Yes
Current Share Bus Yes
Fan Failure Monitor Yes
Temperature Monitoring Yes
Powersink Optional available for quick down programming