CPS-i1500
Model | CPS-i1500(R2) | ||||||
Power | 1500W | ||||||
Nominal Input | 230Vac | ||||||
Input Range AC | 184-264Vac | ||||||
Input Range DC | 250-375Vdc | ||||||
Hold-Up Time | 20ms | ||||||
Inrush Current Protection | Electronic Inrush Limiter 9,8Arms | ||||||
Autostart | Soft start | ||||||
Programmable Output Voltage | 0-18V | 0-30V | 0-60V | 0-90V | 0-150V | 0-300V | 0-400V |
Programmable Output Current | 0-75,0A | 0-62,0A | 0-31,0A | 0-21,0A | 0-12,5A | 0-6,3A | 0-4,7A |
Ripple & Noise mVss | 40mV | 80mV | 120mV | 150mV | 200mV | 300mV | 400mV |
Efficiency | 90% | ||||||
Basic Load | Idling-proof | ||||||
Short Circuit Protection | Continuous | ||||||
Cooling | Controlled stepless fan from EBM Papst (Germany) | ||||||
Dimensions (WxHxD) | 250x161x124mm | ||||||
Safety Standards | EN61010-1, EN61010-2-201, EN62368-1, EN60204-1, EN60950-1 | ||||||
Input to Output Isolation | 3000Vac | ||||||
EMI | EN55032 conducted class B / radiated class A, EN61000-6-3 | ||||||
EMS | EN61000-6-2 | ||||||
MTBF | 400.000h | ||||||
Programming Interface Voltage | 0-5Vdc, 0-10Vdc, 0-20mA, 4-20mA | ||||||
Programming Interface Current | 0-5Vdc, 0-10Vdc, 0-20mA, 4-20mA | ||||||
Monitoring Interface Voltage | 0-5Vdc, 0-10Vdc | ||||||
Monitoring Interface Current | 0-5Vdc, 0-10Vdc | ||||||
Power Good Relay | Yes | ||||||
Sense Compensation | yes | ||||||
Remote Shutdown | yes | ||||||
Reference Voltage | yes | ||||||
Inhibit (Interlock) | yes |