HSR03201LIRC Redundant O-Ring

  • DIN-Rail Power Supply 1phase fix output TS35mm DIN EN 50022
  • Active Inrush Current Protection
  • Temperature Control
  • Clean C/V chart without foldback, ideal for dc drives and dc-UPS
  • Redundant Power Supply
  • Built in O-ring diode


Product Information (PDF) STEP-Datei (STP) Data Sheet (PDF)


HSR03201LIRC Redundant

Model HSR03201LIRC Redundant
Power 320W
Nominal AC Input 115/230Vac select
Input Range AC 90..115Vac/184..265Vac
Input Range DC 250... 375Vdc
Input Frequency 47... 63Hz
Hold-Up Time 40ms
Inrush Current Protection 10,6Aeff / 15Apeak active protection ±6%
Autostart Soft start 20ms
Output Voltage 24V 48V 60V
Adjust Range Vout 22,5... 28,8V 45,6... 52,8V 57... 66V
Ripple & Noise mVpp 20mV 50mV 50mV
Nominal Output Current 13,5A 6,7A 5,4A
Power Boost <=60°C/60s 16,2A 8A 6,5A
Stability at Load Switch ±0,3% ±0,1% ±0,1%
Transient Time < 1ms
Efficiency 91%
Basic load Idling-proof
Short Circuit Protection Continuous
Ambient Operation Temperature -20°C... +70°C
Cooling Natural convection
Temperature Monitoring Yes
Dimensions (WxHxD) 120x124x96mm
IP-Range IP20
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input to Output Isolation 3000Vac
Climatic Class, Humidity 3k3, 95% non condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 600000h
Power Good Relay Yes
Features Built-in redundant O-ring diode, low inrush current
Ordering options Protective coating
Options See datasheet