DISTRIBUTION

 

x

HSE03201LIRC

  • DIN-Rail Power Supply 1phase fix output TS35mm DIN EN 50022
  • Active Inrush Current Protection
  • Temperature Control
  • Clean C/V chart without foldback, ideal for dc drives and dc-UPS

 

Product Information (PDF) STEP-Datei (STP) Data Sheet (PDF)

 




HSE03201LIRC

Model HSE03201LIRC
Power 320W
Nominal AC Input 115/230Vac select
Input Range AC 90..115Vac/184..265Vac
Input Range DC 250... 375Vdc
Input Frequency 47... 63Hz
Hold-Up Time 30ms
Inrush Current Protection 10,6Aeff / 15Apeak active protection ±6%
Autostart Soft start 20ms
Output Voltage 5V 12V 15V 24V 36V 48V 60V
Adjust Range Vout 5,0...9,0V 11,4... 14,4V 14,2... 18V 22,5... 28,5V 34,2... 43,2V 45,6... 57,6V 57... 72V
Ripple & Noise mVpp 30mV 30mV 30mV 20mV 30mV 50mV 50mV
Nominal Output Current 18A 18A 17A 13,5A 8,9A 6,7A 5,4A
Power Boost <=60°C/60s 21,6A 21,6A 20,4A 16,2A 10,7A 8A 6,5A
Stability at Load Switch ±0,5%
Transient Time < 1ms
Efficiency 91%
Basic load Idling-proof
Short Circuit Protection Continuous
Ambient Operation Temperature -20°C... +70°C
Cooling Natural convection
Temperature Monitoring Yes
Dimensions (WxHxD) 120x124x96mm
IP-Range IP20
Safety Norms CSA UL CE according to IEC60950-1
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input to Output Isolation 3000Vac
Climatic Class, Humidity 3k3, 90% non condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 600000h
Power Good Relay Galvanic insulated 60Vdc
Features Low Inrush Curtrent Limiter
Ordering options Protective Coating
Options See datasheet