• DIN-Rail Power Supply 1phase fix output TS35mm DIN EN 50022
  • Active Inrush Current Protection
  • Active PFC (Power Faktur Correktion)
  • Remote Shutdown
  • Temperature Control
  • Clean C/V chart without foldback, ideal for dc drives and dc-UPS


Product Information (PDF) STEP-Datei (STP) Data Sheet (PDF)



Model HPW02401
Power 240W/312W
Nominal AC Input 100... 240Vac
Input Range AC 90... 265Vac
Input Range DC 120... 375Vdc
Input Frequency 47... 63Hz
Hold-Up Time 40ms
Inrush Current Protection 5Aeff / 7Apeak electronic protection ±6%
Autostart Soft start / Soft start 50ms
Output Voltage 12V 24V 36V 48V 60V 72V
Adjust Range Vout 9... 18V 18... 30V 30... 43V 43... 53V 53... 72V 68... 86V
Ripple & Noise mVpp 30mV 30mV 60mV 50mV 50mV 60mV
Nominal Output Current 40°/60°C 15/19A 10/13A 6,7/8,7A 5/6,8A 4.0/5.2A 3,3/4,3A
Power Boost <=60°C/60s 18A 12A 8A 6A 5,,2A 4,3A
Stability at Load Switch ±0,5% ±0,2% ±0,2% ±0,2% ±0,2% ±0,2%
Transient Time < 1ms
Efficiency 0,92
Basic load Idling-proof
Short Circuit Protection Continuous
Ambient Operation Temperature -20°C... +70°C
Cooling Natural convection
Temperature Monitoring yes
Dimensions (WxHxD) 75x130x115mm
IP-Range IP20
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input to Output Isolation 3000Vac
Climatic Class, Humidity 3k3, 90% non condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 500000h
Power Good Relay Yes
Remote Shutdown Yes
Features Active PFC
Ordering options Protective coating
Options See datasheet