CPS-i3000 Laboratory Power Supply Embedded & Wallmount, 12W/CUI, PFC0.99

  • 3D-HD (3D Heat Dissipation) performs 360° mount in the 3-dimensional room
  • 0-max. C/V Programmable & Real Value monitoring
  • N+1 Parallel Operation
  • Maste - Slave
  • Current Share Bus
  • Constant Current / Constant Voltage
  • Fuse Mode & Continuous Mode
  • Sensing
  • Remote Shutdown
  • Inhibit (Interlock)
  • Temperature Alarm & Monitor, Fan Fail
  • Aux +12V 500mA
  • Option Quick Downprogramming Powersink
  • Option Intewrnal O-Ring Diode
  • 9KW in a 2U & up to 15KE in a 3U subframe, >100KW per system
Product Information (PDF) Data Sheet (PDF)



Model CPS-i3000
Continuous Power 3000W
Nominal Input Voltage 230Vac
Input Voltage Range AC 184..265Vac
Input Voltage Range DC 250... 375Vdc
Input Frequency 47... 63Hz
Hold-up Time 30ms
Inrush Current AC 14,6A RMS / 20,7A peak active electronic protection ±6%
Startautomatic Softstart 100ms
Programmable Output Voltage 0-18V 0-30V 0-60V 0-90V 0-150V 0-300V
Programmable Output Currrent 0-185A 0-125A 0-62,5A 0-41,5A 0-25A 0-12,5A
Ripply & Boise mVpp 35mV 35mV 100mV 150mV 200mV 300mV
Stability Loadswitch ±0,2% 0-100%
Response < 1ms 10-100%
Effeciency 92-94%
Power Faktor PFC 0,99
Load Free Operation Continuous
Short Cicuit Protection Continuous
Ambient Operations -20°C... +60°C
Cooling Stepless controlled fans from EBM-Papst flow front-to-rear, Fan Fail Monitor
Temperature Control Power reduction & Monitor
Dimensions (WxHxD) 126,4x84x444mm, 2U or 3U Embedded or hard mount in 90° steps
IP Housing IP20
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input- /Output Isolation 3000Vac
Climatic Calss, Humidity 3k3, 90% non-condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 500000h
Interface Voltage Programming 0... 5Vdc, 0... 10Vdc, 0-20mA, 4-20mA
Interface Current Programming 0... 5Vdc, 0... 10Vdc, 0-20mA, 4-20mA
Interface Voltage Monitoring 0... 5Vdc, 0... 10Vdc
Interface Current Monitoring 0... 5Vdc, 0... 10Vdc
Inhibit (Interlock) Message
O-Ring Current Share Option
Power Good Relais Open/Center/Close
Sense 2V load line
Remote Shutdown Monitor
Reference Voltage +12V 500mA
Options Protective coating, Internal Powersink
Accessory 2U & 3U Frontpanel, 2U & 3U Subframe, Hard-Mount-Kit, RS485, TCP/IP