DISTRIBUTION

 

x

CPS-i1500 Laboratory Power Supply DIN-Rail, 7.2W/CUI

  • 1500W C/V programmable High Density Laboratory Power Supply scalable for test bench
  • Multifunctional analogue Interface 0-5V/0-10V/0-20mA/4-20mA
  • Real Time Monitoring
Product Information (PDF) STEP-Datei (STP) Data Sheet (PDF)

 




CPS-i1500

Model CPS-i1500
Power 1500W
Nominal Input 230Vac slelect
Input Range AC 184..265Vac
Input Range DC 250... 375Vdc
Input Frequency 47... 63Hz
Hold-Up Time 20ms
Inrush Current Protection 9,8Aeff / 13,8Apeak active limiter ±6%
Autostart Soft start
Programmable Output Voltage 0-18V 0-30V 0-60V 0-90V 0-150V 0-300V 0-400V
Programmable Output Current 0-75A 0-62A 0-31A 0-21A 0-12,5A 0-6,3A 0-4,7A
Ripple & Noise mVss 40mV 40mV 120mV 150mV 200mV 300mV 400mV
Stability at Load Switch ±0,2%
Transient Time < 1ms
Efficiency 90%
Basic Load Idling-proof
Short Circuit Protection Continuous
Ambient Operating Temperature -20°C... +70°C
Cooling Controlled stepless fan from EBM Papst (Germany)
Temperature Monitoring Yes
Dimensions (WxHxD) 250x156x114,5mm
IP-Range IP20
Safety Norms CSA UL CE according to IEC60950-1
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input to Output Isolation 3000Vac
Climatic Class, Humidity 3k3, 95% non condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 400000h
Programming Interface Voltage 0... 5Vdc, 0... 10Vdc, 0-20mA, 4-20mA
Programming Interface Current 0... 5Vdc, 0... 10Vdc, 0-20mA, 4-20mA
Monitoring Interface Voltage 0... 5Vdc, 0... 10Vdc
Monitoring Interface Current 0... 5Vdc, 0... 10Vdc
Power Good Relay Yes
Sense Operation yes
Remote Shutdown yes
Reference Voltage yes
Inhibit Contact yes
Ordering Options Protective coating
Power Sink Module
Protected Inhibit Module acc. with SIL03 
Options Isolating transformer for analogue interface, USB2.0 interface with software