CPS-EP2000 Embedded & Wallmount PFC0,99

  • V programming with internal poti
  • OCP & OVP
  • Current Share Bus for N+1 parallel operation
  • Sense Mode
  • Current Monitoring
  • Remote Shutdown
  • Inhibit (Interlock)
  • DC & AC Power Good Relay open/center/close
  • Fan Monitoring
  • Temperature OT alarm
  • 6kW in a 2U & 10kW in a 3U subframe
  • Hard mount in 90° steps
Product Information (PDF) Data Sheet (PDF)



Model CPS-EP2000
Continuous Power 2000W
Nominal Input Voltage 230Vac
Input Voltage Range AC 184... 265Vac
Input Voltage Range DC 250... 375Vdc
Input Frequency 47... 63Hz
Hold-up Time 30ms
Inrush Current AC 14,6A RMS / 20,7A peak active electronic protection ±6%
Startautomatic Softstart 100ms
Vout 24V 36V 48V 72V 110V
Vout prog. with poti 24-30V 30-45V 45-58V 58-90V 90-150V
Aout 84A 56A 42A 28A 18,2A
Ripply & Boise mVpp 35mV 50mV 75mV 150mV 300mV
Stability Loadswitch ±0,05% 0-100%
Response < 1ms 10-100%
Effeciency 92-94%
Power Faktor PFC 0,99
Load Free Operation Continuous
Short Cicuit Protection Continuous
Ambient Operations -20°C... +60°C
Cooling Stepless controlled fans from EBM-Papst flow front-to-rear, Fan Fail Message
Temperature Control Power reduction and message
Dimensions 84x126,4x444mm, 2U or 3U Embedded or hard mount in 90° steps
IP Housing IP20
Safety IEC EN60950-1 EN50178 EN60204-1
Safety Class 1(A) VDE0100 VDE0805
Input- /Output Isolation 3000Vac
Climatic Calss, Humidity 3k3, 90% non-condensing
EMI EN55022B
EMS EN61000-6-2,3
MTBF IEC61709 500000h
Interface Current Monitoring 0-5Vdc
Power Good Relay Open/Center/Close
Sense Mode 2V per load line
Remote Shutdown Message
Options Protective coating
Accessory 2U & 3U Frontpanel, 2U & 3U Subframe, Hard-Mount-Kit